HEAD RESTRAINT RANGE

TTIHR-A

TTIHR-B

TTIHR-C

 

TTFHR

 

TTIHR-A (slotted) Stainless Steel Internal Head Restraints

The TTIHR Head Restraint is designed to restrain the top of the inner leaf of cavity walls. The TTIHR allows vertical movement between the inner leaf and the structure by using a rectangular sleeve which sits in the vertical joint and a top section bolted to the soffit which may slide within the sleeve.

 

The base of the stem must be built within a bed joint with the centre of the stem no closer than 50mm from the edge of the block. The vertical joint should be filled with Mortar each side of the stem. The maximum joint between the top of the blockwork and the underside of the frame is not greater than 50mm.

 

The TTIHR is available with 3 head options i.e., slotted, 10mm hole and 6mm hole. The standard TTIHR is supplied to suit a standard block but specials can be made to suit site requirements.

Tecties, Unit 4 Hurstfield Industrial Estate,
Hague Bar, New Mills, High Peak, SK22 3AT

t: 01663 749361    e: sales@tecties.co.uk

LOCAL STOCKISTS

Tecties, Unit 4 Hurstfield Industrial Estate,
Hague Bar, New Mills, High Peak, SK22 3AT

t: 01663 749361    e: sales@tecties.co.uk

LOCAL STOCKISTS

t: 01663 749361

Tecties, Unit 4 Hurstfield Industrial Estate,
Hague Bar, New Mills, High Peak, SK22 3AT

t: 01663 749361    e: sales@tecties.co.uk

LOCAL STOCKISTS

t: 01663 749361

Tecties, Unit 4 Hurstfield Industrial Estate,

Hague Bar, New Mills, High Peak, SK22 3AT

t: 01663 749361    e: sales@tecties.co.uk

LOCAL STOCKISTS